#1812 Elipse Low-Profile Dust Mask Review

(I want to note that I am was in no way compensated for this review. I researched and purchased this mask on my own.)

 

In today’s blog post, I am going to talk about something that I think is rather important. It is something that I have been lax on myself, but I made a vow with my woodworking friend (Leldon) that we are going to change things and try to do a bit better about it.

What I am referring to is wearing a dust mask when doing our woodworking and cutting wood.

Now I am not going to get all ‘preachy’ over this subject. I have been scroll sawing and doing woodworking for years and while I occasionally wear a mask when I do large orders, I found them to be hot and uncomfortable, and because they tend to fog up my glasses which I need to wear while working, sometimes even dangerous.

But lately, I have noticed that after a cutting session there has been a slight tingling and burning in the back of my nose and throat. The intelligent side of me knows that this isn’t good. With all the wood orders that I have had in the past year, it was high time I did some footwork and gather some information as to how to best protect myself and my lungs from the poisonous particles that I was breathing in each time I was in my shop. I knew there must be someone who made a mask that was not only functional but also comfortable.

I watched a video by “The Wood Whisperer” about this subject and I was convinced more than ever that I needed to address this issue before I made myself sick. (You can watch the short video I saw here: https://youtu.be/Lb5SIZ5hbic)

Everything he said made sense. I would be foolish not to protect myself.

Just about that time, I received an email from LeeValley Tools. It was their bi-weekly ad that came to my email box, and in it, they featured an Elipse P100 Dust mask. I know that they are sometimes a little more expensive than other places, but not having many shopping options where I live and their excellent customer service added to the fact that they stand behind what they sell, I thought I would give it a try. I looked for reviews on this mask and found several. In every one of them, the mask had high marks. Here is one of the reviews that I watched:  https://youtu.be/tYyLKgb90EQ

The general consensus was that this was a good choice for a mask for my usage. One of the most important factors was that it didn’t fog up your glasses like most masks did, yet sealed tightly against your face as well as comfortably.

I went to the LeeValley site and saw the mask was only $35 CDN and the replacement filters were only $15. (http://www.leevalley.com/en/wood/page.aspx?p=74167&cat=1,42207,43647) The filters were rated for one month of “continuous industrial use” which meant that with my using them only one or two days per week, they would last probably half a year. I thought I would give it a try.

I received my order on Monday, and yesterday I had some shop work to do. It would be a good opportunity to test this out for myself and see how tolerable it would be.

The mask was a bit smaller than I thought it would be.

It came in a ‘regular’ size as well as a ‘large’. I took a shot in the dark and figured my face was ‘regular’ so I went with that.

It was compact and lightweight and seemed very well made. I was a bit surprised at the nice quality for the relatively small price. In the past, I had spent nearly $10 on three paper masks that lasted anywhere from five minutes (the cheap elastics broke) to an hour or two. They were hot, uncomfortable and pretty much useless, as there were always gaps between them and my face, defeating the purpose of wearing a mask altogether. I liked that this mask had an exhale port on the front, as it directed the air much lower than the sides of the mask and I am sure contributed to the fact that your glasses were kept clear.

I also purchased a set of replacement filters. They are multi-layered and were also inexpensive given the lifetime that they profess.

I tried it on and it was indeed comfortable. I didn’t feel like I was suffocating at all or that my breathing was restricted. I usually work with cordless, sound-cancelling headphones and play my favorite music while protecting my ears (it amazes me that I don’t have to play the music loud at all to block out the noise of my saw, sander and shop vac!) I also wear reading glasses for all the close work that I do. This was where the real problem came in with using a mask. My glasses would always fog up from breathing and I would have trouble seeing what I was doing.  That could be quite a hazard when working with power tools!

I donned my gear and headed into the shop for a nice cutting session. After the first few minutes, I was totally unaware of the mask and the gear that I was wearing. It just seemed a part of me. The smaller, low-profile mask did not get into my field of vision when I looked down to scroll saw or sand. That is something that I found the larger masks sometimes did. The side ports protruded a great deal and they would block me from seeing what I was doing.

I noticed that even when cutting lots of MDF, I couldn’t smell it at all. Not only was this mask rated for wood particles and dust, but airborne sprays as well. Not only was it effective, but it was surprisingly comfortable as well. I think I have a winner here.

As I said, I am not trying to preach or shame others into following suit. I am rather embarrassed in telling you how little I have worn masks in the 20+ years of me doing woodworking. I always used the usual excuses that I hear – “It is uncomfortable.” “It is hot.”  “It fogs up my glasses.”  “I use a fan or dust collecting system to get the dust out of the air.”

But what many don’t realize is that it isn’t the particles that we SEE that are the most dangerous, it is the tiny, microscopic particles that we don’t that can hurt our lungs the most. While some may not want to be ‘uncomfortable’ when doing their woodworking, I would think that cancer is far more troublesome than wearing a mask would be. Especially when we have some really good choices such as this one.

People are going to do what they will. I realize that. But I feel that it is important for me to set an example to others in the woodworking field to at least consider wearing a mask while woodworking. With all the toxic chemicals used in MDF and plywood and all the toxic dust from hardwood, it is a wise decision to try my best to protect myself the best that I can. I hope you all think so as well.

I am glad that I started this practice. When I finished my cutting and sanding, I felt so much better about things. I didn’t have to clear my nose and throat and felt much cleaner and I know I am ultimately healthier than if I didn’t use a mask. It is a win/win all around.

I hope to see many of you join me.

Have a great Thursday!

Advertisements

5 Comments Add yours

  1. Paul Jordan says:

    Wonderful post Sheila! I ordered one first thing this morning! Thank you! Thank YOU! THANK YOU!!! Like always you are an amazing gift to my daily morning routine! I ordered my mask with Donnalynn and told them it was because of your post this morning. So maybe you will receive a happy face in your mail box from them! If not Here is mine! 🙂 (Now how do I draw a mask in front of the smile to look like a healthy woodworker?!)

    Cyber hug! Suzanne

    Like

  2. Morning Sheila,
    I am guilty of the same thing. I have used the paper dust masks that I got from work and never liked them. I have tried other styles and brands that were no better, they all clouded up my glasses. I still haven’t found one that I like. I am going to check out the one you are using and also the wrap around one I see on the U Tube channels. There is also the full face and head one that looks like a spaceman’s helmet. I have started to cut more mdf and exotic hard woods and figured I should protect my self a little better. All though it is like locking the barn door after the horses are stolen. After over 20 years as a firefighter, 35 years in a factory that didn’t promote the use and living and working with smokers most of my life, I figure it might be an exercise of futility.
    Rick
    http://www.thescrollerandtoler.com
    DeWalt 781 (type 1) and Ex 21
    Find us on Pinterest, FaceBook and Instagram

    Like

  3. Thank you both very much. Yes – It is something that we really need to address. It is so easy to ‘forget’ to wear a mask or to leave one off intentionally, but it is really an important part of our safety that should be treated with respect. My friend Leldon and I made a pact after reading how another scroller saw x-rays of her lungs. She was an occasional woodworker and she said it was shocking how much ‘stuff’ was in them. With this model of mask and other like it, there is really no excuse not to protect ourselves. I am glad you are both on board. Thanks for your comments. 🙂 Sheila

    Like

  4. Jeff says:

    Encouraging safety awareness is never preaching. People who don’t think safety practices are important are usually the ones who suffer. Keep spreading the word.

    Like

    1. Thank you, Jeff. I realize that people will do what they will, but hopefully, with this model of mask on the market that is quite comfortable and doesn’t fog our glasses, it will encourage more to use them on a regular basis. I hope so, anyway. 🙂

      Liked by 1 person

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s